control center forest watch

How ForestWatch Works:

The ForestWatch® Wildfire Detection and Monitoring System from EnviroVision Solutions combines mounted programmable cameras, communication links, computer hardware and some of the most advanced image processing software in the world. Together these elements create a powerful, and highly intelligent early warning system.

The functionality of ForestWatch® can be divided into 3 stages or layers:

1. Imaging Layer

2. Communications Layer

3. Machine Vision Layer

Imaging Layer

The camera is mounted in an optimal high position such as on an existing communications or lookout tower, or even on a specially constructed stayed mast. Most importantly the camera should have an unobstructed 360º view of its surroundings. The camera works 24 hours a day and is programmed to continually rotate and scan pre-set subsections of the landscape at an optimal distance of up to 10 miles. One scan takes 2-6 minutes.

While working with live video, the camera also captures a sequence of still images at each section. These images are then optimized (stabilized, compressed, etc.) by the on-site Image Sampling Engine – a small computerized image processing unit – before being forwarded on to the operations center for analysis by the system software (Machine Vision Layer below).

Communications Layer

The camera and ISE communicates with your operations center and vice versa. This communication link can take the form of a microwave link, wireless internet, fiber optic cable or satellite connection. Given the remote location of so many cameras, microwave links and satellite communication are most commonly used when setting up a ForestWatch® system.

Machine Vision Layer

The operations center is where images from the camera are automatically analyzed by the ForestWatch® software and viewed by a human operator on a computer. Each operator can monitor the feeds of up to 8 cameras at the same time. The use of a multi-view display allows for panoramic views and the efficient monitoring of much more terrain than was traditionally possible.

In addition, the operator works with 3 other screens, which function as follows:

  1. Detection screen: The ForestWatch® software automatically compares the captured images. It does this by using a mathematical algorithm to detect for scene changes that may be smoke. When a potential problem is detected, the operator is alerted and the “offending” images are placed on a Watch List on the side of the screen for further examination.
  2. View screen: Once alerted to a potential problem, the operator can use live uncompressed video footage (optimized at 8 frames a second for transmission over the communication link) and manual camera controls (pan, tilt, zoom) to examine the problem area more closely, and potentially confirm the alarm.
  3. GIS screen: When the operator mouse-clicks on smoke on the Detection screen, that point is immediately highlighted on the terrain map on the GIS screen. The screen will highlight other important spatial information like property borders and wind direction along with exact geographical coordinates.

The operations center also contains a dispatch computer, which can immediately alert senior decision makers and emergency response personnel to a developing situation via the internet or mobile phone. Progress of a fire is distributed to all key stakeholders in this way, supporting better decision-making and resource deployment.

In addition, all camera footage is marked with date and time stamps, tower information and camera settings, and archived in image servers at the operations center for record keeping and post-event analysis.

ForestWatch in Action

Slide background
Slide background
Slide background
Slide background